Adapt pstore test to use systemd-pstore

After systemd has started to support pstore the test needs to be adapted to use this new functionality.
Upon startup, systemd-pstore will monitor and extract the pstore contents and save it inside /var/lib/systemd/pstore/.

This also fixes the failure in the current test as /sys/fs/pstore: is not longer available.

Signed-off-by: Nithin M N <MN.Nithin@in.bosch.com>


(cherry picked from commit 4e1986fa)

test-cases/pstore-test.yaml

@@ -13,26 +13,27 @@ metadata:
   description: "Test the pstore functionality usage"
 
   expected:
-    - "After reboot, logs ca be found at /sys/fs/pstore:"
+    - "After a crash induced reboot, logs can be found at /var/lib/systemd/pstore:"
     - |
         >total 0
-        -r--r--r-- 1 root root 8180 2019-11-15 11:58 console-ramoops-0
-        -r--r--r-- 1 root root 8136 2019-11-15 11:51 dmesg-ramoops-0
-        -r--r--r-- 1 root root 7856 2019-11-15 11:51 dmesg-ramoops-1
+          -rw------- 1 root root 4084 Mar  1 08:32 console-ramoops-0
+          -rw------- 1 root root 4023 Mar  1 08:27 dmesg-ramoops-0
+          -rw-r----- 1 root root 4040 Mar  1 08:15 dmesg.txt
+    - "Logs saved should be same as what was displayed after running pstore display command"
 run:
   steps:
     - "For test purpose, you can generate a kernel crash by setting reboot timeout to 10 seconds and trigger a panic:"
-    - $ sudo sh -c "echo 1 > /proc/sys/kernel/sysrq
-    - $ sudo sh -c "echo 10 > /proc/sys/kernel/panic
-    - $ sudo sh -c "echo c > /proc/sysrq-trigger
-    - "While the target reboots enter the U-Boot"
-    - "In U-Boot, logs can be displayed or saved using pstore command."
+    - $ sudo sh -c "echo 1 > /proc/sys/kernel/sysrq"
+    - $ sudo sh -c "echo 10 > /proc/sys/kernel/panic"
+    - $ sudo sh -c "echo c > /proc/sysrq-trigger"
+    - "When the target reboots enter U-Boot"
+    - "In U-Boot, logs can be displayed using pstore command."
     - "PStore parameters need to be set during U-Boot configuration and match kernel ramoops parameters"
-    - "In the U-Boot execute the below command"
-    - "=> pstore set 0x30000000 0x100000 0x2000 0x2000"
+    - "To view the logs in U-Boot, execute the following command to set the pstore location"
+    - => pstore set 0x30000000 0x100000 0x2000 0x2000
     - "Then all available dumps can be displayed using:"
-    - "=> pstore display"
-    - "Logs can be saved to an existing directory in an Ext2 or Ext4 partition using pstore save, e.g. on root directory of 1st partition of the 2nd MMC:"
-    - "=> pstore save mmc 1:1 /"
-    - "After reboot, logs ca be found at /sys/fs/pstore:"
-    - "$ sudo ls -l /sys/fs/pstore"
\ No newline at end of file
+    - => pstore display
+    - "Make a note of the timestamp of the logs"
+    - => boot
+    - "After target is booted, logs can be found at /var/lib/systemd/pstore:"
+    - "$ sudo ls -l /var/lib/systemd/pstore"
\ No newline at end of file