Skip to content
Snippets Groups Projects

Update from debian/bookworm for apertis/v2024dev2

Merged Update from debian/bookworm for apertis/v2024dev2
proposed-updates/debian/bookworm/8adc4766 into apertis/v2024dev2
Merged Apertis CI robot requested to merge proposed-updates/debian/bookworm/8adc4766 into apertis/v2024dev2
Compare
and
125+ files
+ 983
− 47310
Compare changes
  • Side-by-side
  • Inline
Files
125+
NEW/lsofAPI/lsofAPI.1 deleted 100644 → 0
+ 0
− 278
Current lsof data sources
and what it does with the data.
From the proc and user structures:
process status (p_stat) (e.g., SZOMB)
Lsof uses this information to decide if the process
is active or is a "zombie" it should ignore.
command name
Lsof reports this information to the user.
Process IDentification number (PID) (p_pid)
Lsof reports this information to the user and uses
it in some error messages.
Process Group ID (PGRP) (p_pgrp)
Lsof reports this information to the user, if requested
to do so with an option. Lsof post-processing scripts
may use this information to establish process chains.
Parent PID (PPID) (p_ppid)
Lsof reports this information to the user, if requested.
to do so with an option.
User ID (UID) (p_uid)
Lsof reports this information to the user. By
default it converts UID to login name, but the default
mode can be change with an option.
Current working directory vnode pointer (p_cdir)
Lsof normally reports CWD, but its reporting can be
suppressed. CWD vnode pointer processing is handled as
any other vnode pointer from the file structure would be.
Root directory vnode pointer (p_rdir)
Lsof normally reports a root directory, if it exists,
but the reporting can be suppressed. Root directory
vnode pointer processing is handled as any other
vnode pointer from the file structure would be.
Text and loader file information (via VM map)
Lsof follows the pregion and region changes leading
from the process' VM pointer to any vnodes that are
shadowed by memory regions. It then processes their
vnode pointers just as it processes any others. This
results in a display of the text file used by the
process, and the shared library files it uses.
From file structures:
The file structure address (from the open file "chunk")
Lsof uses this pointer to read the file structure.
It also reports the address for post-processing scripts
that need to identify unique file structure usage --
e.g., check for file descriptor leakage between child
and parent processes.
The usage count (f_count)
Lsof uses this to determine if the file structure is
worth further examination.
The node address (f_data)
Lsof uses this to read file structure successor --
e.g., socket, vnode.
Lsof also reports this address for post-processing
scripts that need to identify unique file usage.
The access code (f_flag)
Lsof uses this code to report whether the file was opened
for read access, write access, or read/write access. Lsof
can also be asked to report the full contents of f_flag.
The file structure type (f_type)
Lsof determines the processing to be applied to the
file structure successor, pointed at by f_data.
The file offset (f_offset)
Lsof saves this *most* useful information for reporting
to the user. It's particularly interesting, for example,
on character device tape files, because when it changes,
the tape user knows the tape is moving.
From socket structures:
Lsof sometimes uses the file structure alone to identify
socket files. At other times it also uses the socket stream
header pointer.
Lsof gets the socket structure pointer from f_data in file
structures whose f_type is DTYPE_SOCKET. (UNIX dialects
whose socket implementations are stream based often don't
have file structure types.) It then reads the socket
structure and uses these fields:
Socket type (so_type)
Lsof uses the socket type -- e.g., SOCK_RAW for
special processing of its structures.
Socket protocol (so_proto)
Lsof reads the protocol domain switch, protosw,
to get the domain structure, so it can find out
to what domain -- e.g., AF_INET -- the socket
belongs.
Socket receive buffer parameters (so_rcv)
Socket send parameters (so_snd)
Lsof reads these buffer parameters to be able to
report file size or position. For example, an
advancing position on an ftp socket can be used
as an indicator that the transfer is making progress.
Socket protocol control block address (so_pcb)
Lsof gets TCP/IP addresses from the protocol control
block.
Socket stream header (so_sth)
Lsof sometimes uses the stream head pointer to
learn information about the socket file. It reads
the stream module names, looking for IP, TCP and
UDP modules and their private q_ptr addresses.
If an IP q_ptr is located, lsof reads the ipcs_s
structure to which it points to get TCP/IP connection
addresses.
Lsof also reads other TCP and UDP structures to
get state and read/write buffer information that
it can report to the lsof user.
From the vnode:
Lsof gets the vnode address from the f_data member of file
structures.
It saves the vnode address for use in extracting path
name components from the kernel name cache.
Reading the vnode:
Usually f_data values point to vnodes. Lsof reads the
structure appropriate to the file type.
Vnode type (derived from v_op)
Lsof must know the vnode type in order to be able to
read any further information about the open file from
the structures that follow the vnode. It determines
the vnode type by comparing the v_op address to a
set of *_vnodeops switch addresses it gets from the
kernel via nlist().
Vnode locks (v_locklist)
If the vnode has a lock list pointer, lsof examines
the chain it addresses, looking for locks belonging
to the process owning the file.
Vnode virtual file system structure (v_vfsp)
Lsof reads the virtual file system structure to
determine the file system on which the vnode resides.
The vfs structure yields the file system information --
mounted-on directory, mounted-on device, NFS device
number, etc. This information is cached by vfs structure
address so vfs information for later vnodes can be
found quickly.
Vnode successors (v_data)
Based on the vnode type it established from v_op, lsof
reads the vnode successor structures addressed by v_data.
AFS type vnodes lead to an AFS node structure; VxFS type
vnodes lead to a vxnode; CDFS nodes to a cdnode; NFS vnodes
to an rnode; etc.
There are many special cases -- e.g., FIFOs and pipes.
The most special are VCHR nodes. They can lead to
snodes, and from there back to vnodes. They can lead
to device nodes on a special file system -- e.g., /dev
nodes on a VxFS file system. They can lead to simple
inodes.
Eventually lsof derives the following data from the
nodes it reads:
Vnode address
File device numbers -- cooked and raw
File node number
Most node structures have a number, but lsof may
have to generate a node number from /dev information
for some character device files.
File size
Link count
File type (v_type) (e.g., FIFO, VREG, etc.)
It's a good indicator of the purpose of the file.
Streams (v_stream)
Lsof saves the device numbers for streams and checks
their module names for IP, TCP, and UDP. If any of
those three appear, lsof processes the vnode stream as
a socket stream.
The kernel name cache:
While device and inode number uniquely identify files,
they aren't easy to use by people who read lsof output.
Lsof output readers want path names.
Lsof tries to accommodate that by reading the contents of
the kernel name cache, keyed by vnode addresses, and matching
that to vnode addresses accumulated while reading open file
structures and vnodes.
Since the kernel cache for a particular vnode also points
to the vnode of its parent, lsof is often successful in
constructing an entire path name from the kernel cache.
Sometimes it can't construct the entire name, but some
terminating components, and even that is helpful.
The mount table:
Lsof reads the mount table via the setmntent()/getmntent()
interface and stores the information for decoding file
system residence, especially when printing open file results.
The file system, for example, is the first component of a
full path name, derived from the kernel name cache, even
when lsof finds all other path name components in the kernel
name cache.
The device table:
Lsof reads the device table (/dev) using opendir(), readdir(),
and stat() calls, so it can report full device names on
VCHR files.
Since the above operations are sometimes time-consuming
and the information seldom changes, lsof caches the
information and tries to get it first from a cache file,
located in the user's home directory. (The cache file may
be stored globally, but it's much more restricted [for
security reasons] in that case.)
Vic Abell <abe@purdue.edu>
March 15, 1999
Apertis Website Terms of Use Privacy Policy