we need not to specify to include "canterbury.h" and
"<canterby/canterbury.h>" as it is taken care by
inclusion of "<canterbury/canterbury-platform.h>"

Reviewed-by: Justin Kim <justin.kim@collabora.com>
Signed-off-by: Rohan Madgula <Rohan.Madgula@in.bosch.com>
Differential Revision: https://phabricator.apertis.org/D5788

Since we are no longer depending on canterbury DBUS api,
it is not needed to wait for canterbury to appear.

Signed-off-by: Rohan Madgula <Rohan.Madgula@in.bosch.com>
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Differential Revision: https://phabricator.apertis.org/D5768

LaunchNewApp dbus method will be obsolete in near
future

Apertis: https://phabricator.apertis.org/T3572



Signed-off-by: Rohan Madgula <Rohan.Madgula@in.bosch.com>
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Differential Revision: https://phabricator.apertis.org/D5752

Signed-off-by: Frédéric Dalleau <frederic.dalleau@collabora.com>
Reviewed-by: Emanuele Aina <emanuele.aina@collabora.co.uk>
Differential Revision: https://phabricator.apertis.org/D5701

Apertis: https://phabricator.apertis.org/T3448



Signed-off-by: Frédéric Dalleau <frederic.dalleau@collabora.com>
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Differential Revision: https://phabricator.apertis.org/D5691

Signed-off-by: Frédéric Dalleau <frederic.dalleau@collabora.com>
Reviewed-by: Justin Kim <justin.kim@collabora.com>
Differential Revision: https://phabricator.apertis.org/D5665

Didcot calls Canterbury application manager to get information about
supported mime types. Remove this mechanism and start using
libcanterbury-platform API to gather information about entry points.

Apertis: https://phabricator.apertis.org/T3448



Signed-off-by: Frédéric Dalleau <frederic.dalleau@collabora.com>
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Differential Revision: https://phabricator.apertis.org/D5621

Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>

Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Justin Kim <justin.kim@collabora.com>
Differential Revision: https://phabricator.apertis.org/D5488

Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Justin Kim <justin.kim@collabora.com>
Differential Revision: https://phabricator.apertis.org/D5487

- No need to depend on dh-systemd explicitly, it is now the default
- No need to enable dh-autoreconf explicitly or depend on it, it is
  now the default

Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Justin Kim <justin.kim@collabora.com>
Differential Revision: https://phabricator.apertis.org/D5486

scripts for running the installed tests and didcot sample client
added under debian/tests which can be run with autopkgtest
utility

[smcv: remove trailing whitespace]

Signed-off-by: Rohan Madgula <Rohan.Madgula@in.bosch.com>
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
Differential Revision: https://phabricator.apertis.org/D4152

Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>

Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>

This will help to detect any future ABI breaks.

Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>

Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>

Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>

"org.apertis.Didcot.Share" interface implementation is incorrect
 which results in failure of integration tests. So as of now it
is removed from didcot package.

Apertis: https://phabricator.apertis.org/T3201



Signed-off-by: Rohan Madgula <Rohan.Madgula@in.bosch.com>
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Differential Revision: https://phabricator.apertis.org/D5097

Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>

This is necessary for all the tests to proceed and get a real
result without "Aborted" outputs.

Apertis: https://phabricator.apertis.org/T3198


Signed-off-by: Marc Ordinas i Llopis <marcoil@collabora.co.uk>
Differential Revision: https://phabricator.apertis.org/D5104


Reviewed-by: Luis Araujo <luis.araujo@collabora.co.uk>

Mathieu Duponchelle authored 8 years ago and Andrej Shadura committed 8 years ago

This serves two purposes:

1. hotdoc won't warn about any incorrect documentation in
   the generated sources.
2. We don't need to remove html in other comments anymore.

Signed-off-by: Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
Differential Revision: https://phabricator.apertis.org/D4475

Mathieu Duponchelle authored 8 years ago and Andrej Shadura committed 8 years ago

And reduce our extensions requirements to the newly-consolidated
hotdoc packages.

Signed-off-by: Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
Differential Revision: https://phabricator.apertis.org/D4477

Signed-off-by: Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Differential Revision: https://phabricator.apertis.org/D4476

The conservative default is the same as ${libdir}, i.e.
/usr/lib/MULTIARCH, but there's no real point in multiarch for most
libexec binaries (in particular, for our tests) and it makes finding
the tests a little harder.

Signed-off-by: Rohan Madgula <Rohan.Madgula@in.bosch.com>
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Differential Revision: https://phabricator.apertis.org/D4606

As didcot is on demand service,If any client calls
didcot method some times it results didcot to throw
error message "Couldn't able to get the information" to
the clients as canterbury dbus proxy is not yet created.
This patch resolves the issue.

Signed-off-by: Rohan Madgula <Rohan.Madgula@in.bosch.com>
Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Differential Revision: https://phabricator.apertis.org/D4560

Signed-off-by: Simon McVittie <simon.mcvittie@collabora.co.uk>

Reviewed-by: Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
Signed-off-by: Héctor Orón Martínez <zumbi@debian.org>
Differential Revision: https://phabricator.apertis.org/D4322

+ activate the devhelp extension and update the build-depends
+ use tar-ustar to allow us to have filenames longer than
  99 characters in archives.

The text for the standalone markdown documentation was taken
from the gtk-doc files removed in a previous commit.

Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
Signed-off-by: Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
Differential Revision: https://phabricator.apertis.org/D4096

Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
Signed-off-by: Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
Differential Revision: https://phabricator.apertis.org/D4095

Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
Signed-off-by: Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
Differential Revision: https://phabricator.apertis.org/D4094

This is not how we expose documentation, and this file
was only a half-completed template.

Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
Signed-off-by: Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
Differential Revision: https://phabricator.apertis.org/D4093

Latter commits will replace it with hotdoc

Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
Signed-off-by: Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
Differential Revision: https://phabricator.apertis.org/D4092

Signed-off-by: Justin Kim <justin.kim@collabora.com>

didcot-client is accepts the data through
command line arguments ,It is a sample test client
to test the functionality of didcot service.

Signed-off-by: Rohan Madgula <Rohan.Madgula@in.bosch.com>
Reviewed-by: Justin Kim <justin.kim@collabora.com>
Differential Revision: https://phabricator.apertis.org/D3473

didcot tests are meant to run only when installed,
and it is added under installed_test_programs.

Signed-off-by: Rohan Madgula <Rohan.Madgula@in.bosch.com>
Reviewed-by: Justin Kim <justin.kim@collabora.com>
Differential Revision: https://phabricator.apertis.org/D3432

ShareUri() and ShareLiteral () methods added to the interface
to share location and plain text respectively.

Signed-off-by: Rohan Madgula <Rohan.Madgula@in.bosch.com>
Reviewed-by: Justin Kim <justin.kim@collabora.com>
Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
Differential Revision: https://phabricator.apertis.org/D712

A new data structure is created for each method request
to handle the method properly

Signed-off-by: Rohan Madgula <Rohan.Madgula@in.bosch.com>
Reviewed-by: Justin Kim <justin.kim@collabora.com>
Differential Revision: https://phabricator.apertis.org/D711

Signed-off-by: Justin Kim <justin.kim@collabora.com>

As a package name, 'didcot-dev' sounds like a dev package for a daemon.
However, the included files are actually related to shared objects.

Reviewed-by: Simon McVittie <simon.mcvittie@collabora.co.uk>
Signed-off-by: Justin Kim <justin.kim@collabora.com>
Differential Revision: https://phabricator.apertis.org/D3069