Signed-off-by: Dylan Aïssi <dylan.aissi@collabora.com>

Signed-off-by: Dylan Aïssi <dylan.aissi@collabora.com>

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

Signed-off-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.co.uk>

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>

This reverts commit fce0ce56.

This reverts commit 9d0655c8.

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>

Currently, it only builds bl31 for the H3, M3N and M3W.

Also add `$($(subplatform)_assigns)` in the clean step. It is needed for
cleaning the rcar platform.

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>

Add support for multiple targets depending on the platform.
This is a preparation commit for supporting the Renesas R-Car platform
that uses bl31.srec and bl2.srec.

Also add a make_target variable that can be different than bl31 for some
platforms.

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Change-Id: I3f80f3e1341921deb86fb4cf7539703882ac945b

On the R-Car Gen3 boards, u-boot will apply this reserved-memory node
directly on the Linux device-tree.

The linux kernel requires that the ranges, #address-cells
and #size-cells values must be set in the reserved-memory node.

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Change-Id: I7d7f048195b5499940e386f4744157f74b0df9f9

Ritesh Raj Sarraf authored 2 years ago and Dylan Aïssi committed 2 years ago

Signed-off-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com>

Signed-off-by: Dylan Aïssi <dylan.aissi@collabora.com>

Ritesh Raj Sarraf authored 2 years ago and Dylan Aïssi committed 2 years ago

Signed-off-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.co.uk>

Signed-off-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com>

With the latest packaging changes, this patch should not be needed
anymore

Signed-off-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com>

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

Add target to build AFT for the TI am62x SoC.

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

Signed-off-by: Dylan Aïssi <dylan.aissi@collabora.com>

Signed-off-by: Dylan Aïssi <dylan.aissi@collabora.com>

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>

Bump version in the changelog to force a rebuild using the latest
dwarf2sources.

This is required since on v2022 the latest version for dwarf2sources
is available in -updates.

Signed-off-by: Walter Lozano <walter.lozano@collabora.com>

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>

For each subplatform, make is called using the same PLAT variable. If
the build is not cleaned between each call, objects will remain the
same, without rebuilding them.

This issue is producing all subplatforms targets to be the same for each
platform, e.g.: imx8mn and imx8mn_uart4;

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>

By default, iMX8MN uses UART2 console. However, other boards support in
Apertis (e.g. Variscite VAR-SOM-MX8M-NANO board, BSH SMM S2 boards) uses
UART4.

Add two subplatforms for imx8mn platform:
  * imx8mn: default configuration
  * imx8mn_uart4: console set to UART4

This will generate the following tree:

  $ tree usr/lib/arm-trusted-firmware/imx8mn*
  usr/lib/arm-trusted-firmware/imx8mn
  └── bl31.bin
  usr/lib/arm-trusted-firmware/imx8mn_uart4
  └── bl31.bin

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>

This reverts commit 92800f31.

iMX8MN boards uses different UART ports for console. Instead of
disabling it, the proper UART register address must be provided. Revert
this hack and set this register address in follow up commits.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>

Signed-off-by: Apertis CI <devel@lists.apertis.org>

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>