Skip to content
Snippets Groups Projects
rules 4.28 KiB
Newer Older
#!/usr/bin/make -f

include /usr/share/dpkg/architecture.mk
include /usr/share/dpkg/buildtools.mk

export DH_VERBOSE=1
export TF_CFLAGS += -ffile-prefix-map=$(CURDIR)=.
export DEB_BUILD_MAINT_OPTIONS=hardening=+all

# Enable verbose build by default, disable when terse is specified.
ifneq (,$(filter terse,$(DEB_BUILD_OPTIONS)))
VERBOSE=0
else
VERBOSE=1
endif
platforms := g12a gxbb sun50i_a64 sun50i_h6 rcar rk3328 rk3399 rpi3 rpi4 imx8mn imx8mm k3
# Disable building of imx8mq, as it is not well supported upstream.
#platforms_nodebug := imx8mq
Wei Gao's avatar
Wei Gao committed
platforms_nodebug := qemu
qemu_assigns := QEMU_USE_GIC_DRIVER=QEMU_GICV3 BL32_RAM_LOCATION=tdram LOG_LEVEL=30 SPD=opteed
qemu_make_target := all
qemu_targets := bl*.bin

# By default, iMX8MN uses UART2 console. However, other boards supported
# upstream (e.g. Variscite VAR-SOM-MX8M-NANO board) uses UART4.
# Add two subplatforms for imx8mn platform:
#   * imx8mn: default configuration
#   * imx8mn_uart4: console set to UART4
imx8mn_subplatforms := imx8mn imx8mn_uart4
imx8mn_uart4_assigns := IMX_BOOT_UART_BASE=0x30a60000

# By default, iMX8MM uses UART2 console. However, other boards
# use other UARTs
imx8mm_subplatforms := imx8mm imx8mm_uart1 imx8mm_uart3 imx8mm_uart4
imx8mm_uart1_assigns := IMX_BOOT_UART_BASE=0x30860000
imx8mm_uart3_assigns := IMX_BOOT_UART_BASE=0x30880000
imx8mm_uart4_assigns := IMX_BOOT_UART_BASE=0x30A60000

# TF-A's regulator setup breaks Ethernet on some H6 boards,
# so make it optional by having two subplatforms:
#   * sun50i_h6: default configuration
#   * sun50i_h6_no_pmic: skip regulator setup
sun50i_h6_subplatforms := sun50i_h6 sun50i_h6_no_pmic
sun50i_h6_no_pmic_assigns := SUNXI_SETUP_REGULATORS=0

rk3328_targets := bl31/bl31.elf
rk3399_targets := bl31/bl31.elf

rcar_subplatforms := rcar_uclb_h3 rcar_uclb_m3w rcar_uclb_m3n
rcar_uclb_h3_assigns := LSI=H3 RCAR_DRAM_SPLIT=1 RCAR_GEN3_ULCB=1 PMIC_LEVEL_MODE=0 RCAR_DRAM_LPDDR4_MEMCONF=0 SPD=opteed RCAR_LOSSY_ENABLE=1
rcar_uclb_m3n_assigns := LSI=M3N RCAR_GEN3_ULCB=1 PMIC_LEVEL_MODE=0 RCAR_DRAM_LPDDR4_MEMCONF=0 SPD=opteed RCAR_LOSSY_ENABLE=1
rcar_uclb_m3w_assigns := LSI=M3 RCAR_DRAM_SPLIT=2 RCAR_GEN3_ULCB=1 PMIC_LEVEL_MODE=0 RCAR_DRAM_LPDDR4_MEMCONF=0 SPD=opteed RCAR_LOSSY_ENABLE=1

rcar_targets := bl31.srec bl2.srec
rcar_make_target := rcar

# Always set CROSS_COMPILE, which also works for native builds.
Martyn Welch's avatar
Martyn Welch committed
# TARGET_BOARD only required for k3 platform, but safe to set as not used at all elsewhere.
define build_platform
	$(eval platform := $(1))
	$(eval debug := $(2))
	$(eval buildtype := $(3))
	$(eval subplatforms := $(if $($(platform)_subplatforms), $($(platform)_subplatforms), $(platform)))
	$(eval targets := $(if $($(platform)_targets), $($(platform)_targets), bl31.bin))
	$(eval make_target := $(if $($(platform)_make_target), $($(platform)_make_target), bl31))
Martyn Welch's avatar
Martyn Welch committed
	$(eval board := $(if $(filter k3,$(platform)),lite,))
	$(foreach subplatform, $(subplatforms), \
		CROSS_COMPILE=aarch64-linux-gnu- CFLAGS=--param=min-pagesize=0 LDFLAGS= TF_LDFLAGS=--no-warn-rwx-segments dh_auto_build -- V=$(VERBOSE) DEBUG=$(debug) $($(subplatform)_assigns) PLAT=$(platform) TARGET_BOARD=$(board) $(make_target) ; \
		$(foreach target, $(targets), \
			install -m644 build/$(platform)/$(board)/$(buildtype)/$(target) -Dt build/renamed/$(subplatform) ; \
		) \
		# For each subplatform, make is called using the same PLAT variable. If
		# the build is not cleaned between each call, objects will remain the
		# same, without rebuilding them.
		make DEBUG=$(debug) $($(subplatform)_assigns) PLAT=$(platform) clean ; \
%:
	dh $@

override_dh_auto_build:
# Disable building of arm-trusted-firmware-tools
ifeq ($(filter pkg.arm-trusted-firmware.notools,$(DEB_BUILD_PROFILES)),)
	dh_auto_build --sourcedir=tools/fiptool     -- DEBUG=1 V=$(VERBOSE) HOSTCC=$(CC) HOSTCCFLAGS="$(CFLAGS) $(CPPFLAGS)"
	dh_auto_build --sourcedir=tools/cert_create -- DEBUG=1 V=$(VERBOSE) HOSTCC=$(CC) HOSTCCFLAGS="$(CFLAGS) $(CPPFLAGS) -std=c99 -DUSE_TBBR_DEFS=1"
# Only build firmware on arm64.
ifeq ($(DEB_HOST_ARCH),arm64)
  override_dh_auto_build: $(platforms) $(platforms_nodebug)
  $(platforms):
	$(call build_platform,$@,1,debug)
  $(platforms_nodebug):
	$(call build_platform,$@,0,release)
override_dh_installchangelogs:
	dh_installchangelogs -parm-trusted-firmware docs/change-log.md
	dh_installchangelogs -parm-trusted-firmware-tools