diff --git a/test-cases/secure-boot-imx6.yaml b/test-cases/secure-boot-imx6.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..2f8b1fa52e65a416dfeff35d0b0ce38f6adbe8f0
--- /dev/null
+++ b/test-cases/secure-boot-imx6.yaml
@@ -0,0 +1,70 @@
+metadata:
+  name: secure-boot-imx6
+  format: "Apertis Test Definition 1.0"
+  image-types:
+    minimal: [ armhf ]
+  image-deployment:
+    - OSTree
+  type: functional
+  exec-type: manual
+  priority: medium
+  maintainer: "Apertis Project"
+  description: "Test that Secure Boot via HAB on the SabreLite board works for bootloader and
+                initial OS image in FIT format."
+
+  pre-conditions:
+    - "Requires the DUT to be flashed with a signed U-Boot built with HAB and FIT image support
+      as provided since version 2019.01+dfsg-7co6. U-Boot could be installed with
+      [public U-Boot installer v2021dev1.0](https://images.apertis.org/release/v2021dev1/v2021dev1.0/installer/mx6qsabrelite-uboot/)
+      or any newer version."
+    - "Requires a DUT with fused SRK hash (it's a irreversible operation! Please refer to the documentation)"
+    - 'It is expected that DUT is working in "open" HAB mode'
+    - "In addition need to use image without signed kernel, for example older OSTree-based image
+      from [v2019 release](https://images.apertis.org/release/v2019/v2019.2/armhf/minimal/)"
+
+  expected:
+    - "U-Boot is booted without HAB validation errors"
+    - "U-Boot is able to verify and boot signed FIT image"
+    - 'U-Boot hangs in "closed" state trying to boot with unsigned image'
+
+  notes:
+    - 'All commands should be typed in U-Boot CLI'
+    - 'In the "open" mode HAB will accept the FIT image signed with any signature'
+
+run:
+  steps:
+    - "Stop in U-Boot prompt"
+    - "Check if flashed U-Boot have HAB support and correct SRK hash fused"
+    - $ hab_status
+    - |
+        >Secure boot disabled
+
+        HAB Configuration: 0xf0, HAB State: 0x66
+        No HAB Events Found!
+    - "Insert SD-card with flashed Apertis OSTree-based armhf image and start the boot process"
+    - $ run bootcmd
+    - "The output must contain following output while loading the image, meaning the Secure Boot is enabled and the image
+       is signed with the proper signature"
+    - |
+        >hab fuse not enabled
+
+        Authenticate image from DDR location 0x12000000...
+
+        Secure boot disabled
+
+        HAB Configuration: 0xf0, HAB State: 0x66
+        No HAB Events Found!
+
+        i.MX HAB verification: image verification passed
+        ## Loading kernel from FIT Image at 12000000 ...
+    - "Switch off the DUT to clear any signature-related artifacts from the memory"
+    - "Power on the device and stop in U-Boot prompt"
+    - "Emulate that device is in 'closed' state:"
+    - $ fuse override 0 6 0x2
+    - "Swap the SD-card to another one with flashed old Apertis armhf image with the unsigned kernel, and start the boot process"
+    - $ run bootcmd
+    - "The system should be stopped just after kernel load with error below"
+    - |
+        >i.MX HAB verification: IVT not found
+        ### ERROR ### Please RESET the board ###
+