Signed-off-by: Dylan Aïssi <dylan.aissi@collabora.com>

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

Build a version of the firmware with a tweaked RCW to enable I2S signals
on EC1_TXD2 (SAI4_TX_DATA) and EC1_GTX_CLK (SAI4_TX_SYNC) pins.

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

A Vim inspired typo (that I thought I'd already corrected and pushed)
has managed to creep into the rules file. Frustratingly the build
failure isn't getting picked up by CI. Correct the typo.

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

Build a version of the firmware with a tweaked RCW to enable GPIO wake
on the EC1_TXD3 pin (GPIO3_DAT12).

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

The ls1028ardb platform is failing to build in CI with the following
error:

[  233s] plat/nxp/common/setup/ls_bl2_el3_setup.c: In function ‘ls_bl2_el3_plat_arch_setup’:
[  233s] <command-line>: error: invalid suffix "x" on integer constant
[  233s] plat/nxp/common/setup/ls_bl2_el3_setup.c:189:31: note: in expansion of macro ‘BL2_BASE’
[  233s]   189 |                               BL2_BASE,
[  233s]       |                               ^~~~~~~~

Looking at the definition of `BL2_BASE` we find:

BL2_BASE        :=      $(shell echo "0x"$$(echo "obase=16; ${BL2_BASE_ADDR}" | bc))

There is no dependency on `bc` in the packaging and thus this is
unlikely to be installed in the CI build environment. Add this
dependency.

Note: This change is only needed as long as we are supporting the
      ls1028ardb and associated platforms.

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

Proactively adding support for ls1028ardb as a potential client
platform.

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

Signed-off-by: Dylan Aïssi <dylan.aissi@collabora.com>

Signed-off-by: Dylan Aïssi <dylan.aissi@collabora.com>

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>

Merge remote-tracking branch 'origin/apertis/v2025dev1' into proposed-updates/debian/trixie/1818fe8b

Signed-off-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.co.uk>

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>

This reverts commit fce0ce56.

This reverts commit 9d0655c8.

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>

Currently, it only builds bl31 for the H3, M3N and M3W.

Also add `$($(subplatform)_assigns)` in the clean step. It is needed for
cleaning the rcar platform.

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>

Add support for multiple targets depending on the platform.
This is a preparation commit for supporting the Renesas R-Car platform
that uses bl31.srec and bl2.srec.

Also add a make_target variable that can be different than bl31 for some
platforms.

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Change-Id: I3f80f3e1341921deb86fb4cf7539703882ac945b

On the R-Car Gen3 boards, u-boot will apply this reserved-memory node
directly on the Linux device-tree.

The linux kernel requires that the ranges, #address-cells
and #size-cells values must be set in the reserved-memory node.

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Change-Id: I7d7f048195b5499940e386f4744157f74b0df9f9

Ritesh Raj Sarraf authored 2 years ago and Dylan Aïssi committed 2 years ago

Signed-off-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com>

Signed-off-by: Dylan Aïssi <dylan.aissi@collabora.com>

Ritesh Raj Sarraf authored 2 years ago and Dylan Aïssi committed 2 years ago

Signed-off-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.co.uk>

Signed-off-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com>

With the latest packaging changes, this patch should not be needed
anymore

Signed-off-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com>

Merge remote-tracking branch 'origin/apertis/v2024dev1' into proposed-updates/debian/bookworm/d21f430d

* origin/apertis/v2024dev1: (30 commits)
  Release arm-trusted-firmware version 2.7.0+dfsg-2+apertis3
  d/rules: Add k3 target
  Release arm-trusted-firmware version 2.7.0+dfsg-2+apertis2
  Refresh the automatically detected licensing information
  Patch reverting upgrade to openssl 3.0
  Revert Fix build failure by ignoring warnings for RWX segments
  Revert passing --param=min-pagesize=0 in CFLAGS
  Refresh the automatically detected licensing information
  Release arm-trusted-firmware version 2.7.0+dfsg-2+apertis1
  Release arm-trusted-firmware 2.5+dfsg-1+apertis4
  Release arm-trusted-firmware version 2.5+dfsg-1+apertis3
  d/rules: Call make clean between each subplatforms rebuild
  Release arm-trusted-firmware version 2.5+dfsg-1+apertis2
  d/rules: Add imx8mn_uart4 target subplatform
  Revert "d/patches: imx8m: Disable ATF console_imx_uart_register"
  Release arm-trusted-firmware version 2.5+dfsg-1+apertis1
  Refresh the automatically detected licensing information
  Import Upstream version 2.5+dfsg
  Release arm-trusted-firmware version 2.4+dfsg-2+apertis2
  d/patches: imx8m: Disable ATF console_imx_uart_register
  ...